RaveBOX icon

RaveBOX

VIRTUAL DRUM MACHINE
User manual · version 1.0.1 · AudioLab · iPad (iPadOS 17 or later) · Italiano

1Quick start

RaveBOX is an 8-track groovebox with a 16-step sequencer, 9 sound machines, classic-style drum kits, a sampler and effects. On first launch you get 4 ready-made patterns: Techno minimal 140 BPM, House 130, Breakbeat 136 and Drum and bass 170.

  1. Press ▶ to hear pattern P01.
  2. Tap the PATTERN 01/64 display, then one of the first 4 trig keys to switch style.
  3. Press EDIT and tap the 16 trig keys at the bottom to add or remove hits on the selected track.
  4. Pick a track with T1…T8 and change its sound with PRESET ◀ ▶.
  5. Save with SAVE under PATTERN (the first time it asks for a name).
RaveBOX saves your session automatically when you switch to another app or close it: when you come back, everything is where you left it.

2The panel

Logo
BPM · TAP · ±1 · Q OFF · Q 1/4 · Q BAR · CLICK
Meter · MAIN · DSP
PROJECT
SAVE AS · LOAD

PATTERN
◀ ▶ · EDIT · SAVE
Screen: track, preset, parameters A–H, waveform, roll
TRIG · SRC · FLTR · AMP · LFO · FX · SEND · MIX · MST
Encoders A–H

MACHINE (display) ◀ ▶
PRESET ◀ ▶ · SAMPLE ◀ ▶
SAVE PRESET · DEL · SAMPLE HUB
ROLL · COPY · PASTE · CLEAR · TRIG nn ACC SLIDE DEL · KEYB/PADS · OCT− OCT+
● REC · ▶ PLAY · ❚❚ PAUSE · ■ STOP · MUTE · SOLO · LENGTH 1/2/4 BAR · PAGE 1–4 (+ bar LEDs)
Track keys T1 … T8
16 trig keys

RaveBOX runs in landscape, full screen. The panel scales to every iPad (mini, 11", 13") and keeps its proportions.

3Tempo and transport

ControlWhat it does
▶ ❚❚ ■Play, pause (resumes from the same point), stop (back to the start).
● RECLive recording of notes and knob movements: see REC.
TAPTap in time at least twice: the BPM is the average of your taps. +1 −1 fine-tune by one BPM.
Q OFF Q 1/4 Q BARWhen a pattern chosen during playback starts: immediately, on the next 1/4 note or on the next bar.
CLICKMetronome.
MAINMaster volume. The yellow LED lights when the limiter is working; DSP % shows how hard the audio engine is working.
LEDs under PAGEBar counter 1-2-3-4, the same for all tracks.
Each pattern remembers its own tempo: change the BPM on a pattern and that becomes its tempo. When you switch pattern during playback, the tempo changes as the new pattern starts.

4Patterns

RaveBOX has 64 patterns in 4 banks of 16. Each pattern holds the notes of all 8 tracks, their sounds (machine, preset, parameters, sample) and the tempo.

5Tracks and machines

The 8 tracks start as KICK, SNARE, HI-HAT, PERC, BASS, SYNTH, KEYS and SAMPLER, but any track can use any machine: tap the MACHINE display for the list or use ◀ ▶.

MachineUse it for
Kick SynthSynthesized kick: pitch sweep, ADSR, click, drive, saturation.
SnareSnare and clap: body, noise, snappy.
Hi-HatClosed, pedal and open hats with adjustable metallic tone.
Percussion12 voices: toms, rim, clave, conga, cowbell, clap, shaker, tambourine, crash.
Bass/LeadAcid bass, sub and leads: filter, resonance, accent, slide, glide.
Poly SynthPads, chords, stabs, strings.
FM KeysElectric piano, bells, organ and mallets with FM synthesis.
Drum MachineA full kit on a single track.
SamplerPlays a sample: from the kits or from your own files.

Presets

Every machine has many presets (over 160 in total). Use ◀ ▶ or tap the name. A preset always opens with its original sound. When you change a parameter a * appears: save your sound with SAVE PRESET (it shows with ★ in the list; DEL deletes it).

Mute and solo

Press MUTE: the track keys turn tracks off and on. Press SOLO: only the tracks you choose play, even if they were muted. Leaving SOLO restores your previous mutes.

Length

1 BAR 2 BAR 4 BAR per track, independently. Lengthening repeats the bar; shortening keeps the notes stored. PAGE 1–4 chooses which bar the trig keys show.

6Programming trigs

  1. Press EDIT (red LED on). Without EDIT the sequencer is protected and taps don't erase anything.
  2. Tap a trig key to add or remove a hit.
  3. Hold a trig to select it: ACC accents it (yellow LED), SLIDE ties it to the next one (melodic instruments), DEL deletes it.
  4. On the TRIG page you set note, velocity and length of the selected trig.
With EDIT off (stopped or playing), the steps play live: they sound the instant you press them: a tap plays a short note, holding keeps the note (and the LED) on for as long as your finger stays down. The programmed sequence is shown only in EDIT; while playing the cursor light runs across the steps, in REC only the step you press lights up. On melodic tracks step 1 is the base note (OCT−/OCT+) and each step goes up a semitone; on drum tracks each step is a voice.

7Roll and keyboard

8REC: live recording and automation

● REC and EDIT are exclusive: turning one on turns the other off. REC arms (red LED); recording happens while the pattern plays (▶).

9LFO

Every track has an LFO that moves one parameter of its machine. Set it on the LFO page; it is saved with the sound (per pattern, in user presets and in projects). Changing factory preset keeps the LFO as it is.

ParameterWhat it does
WaveSINE, TRI, SAW+, SAW-, SQR, S&H (random value every cycle).
RateCycle length, always in time: from 8 bars to 1/32, triplets included.
DepthAmount, positive or negative. OFF = LFO off.
DestThe modulated parameter (Cutoff, Tune, Decay, Volume…). Filter or tone by default.
TrigFREE = follows the bars; NOTE = the cycle restarts on every note.

10Parameters and encoders

The 8 encoders A–H follow the page chosen under the screen. Drag up or down to change a value; double-tap restores the default.

PageContents
TRIGNote, velocity and length of the selected trig; track length.
SRCSource: waveform, pitch, tone, sample start/end…
FLTRFilter, resonance, drive, saturation.
AMPAttack, Decay, Sustain, Release and instrument volume.
LFOWaveform, rate, depth, destination and retrigger of the track LFO.
FXTrack effects: LP/HP filter, bitcrusher, sample-rate reduction, pan, delay and reverb sends, level.
SENDDelay (time, feedback, tone, level) and reverb (size, damp, level).
MIXLevels of the 8 tracks.
MSTMaster FX preset, compressor, Loud, Overblast, Main, audio Buffer.

11Sampler and kits

On a SAMPLER track the screen shows the waveform with the S (start) and E (end) cursors: move them with the Start / End encoders (SRC page) or drag them with your finger.

Sample Hub

Included kits

808 Style, 909 Style, 606 Style, 707 Style, CR-78 Style, RX Digital and Rave Kicks: 10 sounds each, synthesized by RaveBOX on first launch using the techniques of classic drum machines.

12Effects and master

Each track has a filter, bitcrusher, pan and sends to a tempo-synced ping-pong delay and a stereo reverb. On the master: compressor, Overblast (bass push), Loud (perceived loudness, 0…+12 dB) and a limiter that prevents distortion. MST has 8 master presets (Clean, Club, Dub Space, Warehouse…).

13Projects and files

14Troubleshooting

ProblemSolution
Crackles or audio dropoutsCheck DSP %: if it's high, set Buffer to 1024 on the MST page. Close other audio apps.
Tapping the trig keys does nothingTurn on EDIT.
PASTE or CLEAR do nothingThey work only in EDIT.
A sampler track is silentThe sampler starts empty: pick a sample with SAMPLE ◀ ▶ or from the Sample Hub.
The pattern changes "late"That's quantization: with Q BAR it waits for the end of the bar; use Q OFF to switch immediately.

15Contact and support

Questions, problems or suggestions: audiolabtenerife@gmail.com. We reply in English, Italian and Spanish.

Support and FAQ · Privacy policy